Paint Booth In delhi

Paint Booth is an essential equipment for containing the overspray and safeguarding the health of the work force. It finds a very wide application in the industry where various paint finishes has to be given to the wooden products. It not only protects manpower from the harmful effects of the overspray but also saves the environment. A paint booth ensures a dust free area for painting and good product finish. Broadly the Paint Booths can be categorized into two types as follows:

  • Dry Paint Booth.

 

  • Water Wash Paint Booth.

Working Principle:

The Andrea Filter media (shown in the picture on the right) is very widely used in the industry. It is made of a special paper media and is easily disposable. The overspray passes through a series of the holes cutout which are placed in a zigzag fashion in the pleated media. Due to the change in direction of the airflow the paint particles get trapped in the media and clean air is exhausted out through the fan mounted on top.                                                                                                       

                                                                          

 

 

 

 

 

 

 

 

1. Dry Paint Booth:

As the name suggests, in Dry Paint Booth the overspray passes through the media filter. Various type of filter media can be used depending on the application. A washable baffle filter can also be used in front the filter media to reduce the load on the main filter. The suction system can comprise of the Centrifugal Blower or Axial Flow Fans depending on the pressure drop.

2. Water Wash Paint Booth:

Water Wash Paint Booths has a vertical water screen to catch overspray. The overspray hits the water falling on the vertical water screen where it gets mixed with the water and falls down in the tank below. The water in the tank is recirculated through an arrangement of pump, nozzles and pipework. Before recirculating the water, it gets filtered in the filter box and relatively clean water in recirculated. The tank is added with an alkali mixture to break down sticky overspray resins. The broken-down resin is collected in the tank. The air is further passed through the series of baffle plates placed in the zig zag fashion where it catches the fine paint particles which escape the water screen. The air is finally passed through the centrifugal blower mounted on top.

Wet Scrubbers: A Closer Look: Wet scrubbers represent a sophisticated approach to emissions control, harnessing the power of liquid interaction to cleanse gases of pollutants. These scrubbers are not merely devices; they are eco-conscious tools that hold the potential to transform industrial emissions. Wet scrubbers are engineered to purify process streams and remove harmful substances from gases before they are released into the atmosphere. Their ability to effectively handle moist gases and high-temperature streams positions them as a versatile solution for diverse industries.

Versatility and Effectiveness: Airfilt Technologies' Fume Scrubbers harness the principles of wet scrubbing to their fullest potential. By employing a liquid medium to capture and neutralize pollutants, these scrubbers exhibit a remarkable ability to recover small particles from gaseous flows. This versatility makes them suitable for a wide range of applications, from chemical manufacturing to electronics production. Regardless of the industry, these scrubbers provide a reliable shield against harmful emissions, promoting cleaner air and better health.

Purity and Responsibility: In an era where environmental responsibility is a shared goal, Fume Scrubbers play a crucial role in upholding ethical industrial practices. Airfilt's dedication to purity and quality shines through in their scrubber technology. By purifying process streams and removing pollutants from gases, these scrubbers align with international emission standards, ensuring that industries maintain compliance while contributing to a healthier planet.

Mastering Moisture and Heat: One of the defining features of wet scrubbers is their ability to manage moist and high-temperature gases with remarkable efficiency. Airfilt Technologies' Fume Scrubbers are no exception. By seamlessly handling gases laden with moisture and elevated temperatures, these scrubbers offer a reliable solution even in the most challenging operational environments. This capability not only ensures effective emissions control but also safeguards the longevity of the scrubbers themselves.

Customization for Industry Needs: Recognizing the uniqueness of every industrial process, Airfilt Technologies crafts Fume Scrubbers that are tailor-made to address specific challenges. Just as no two industries are identical, no two scrubber solutions are the same. This commitment to customization guarantees that each scrubber is optimized for maximum efficiency, resulting in cleaner emissions and reduced environmental impact.

Advancing Towards a Cleaner Future: As industries continue to expand and evolve, so does the importance of responsible emissions control. Airfilt Technologies Private Limited stands as a beacon of progress, offering Fume Scrubbers that not only meet the demands of modern industry but also embrace the values of environmental stewardship. By incorporating the principles of wet scrubbing and coupling them with cutting-edge technology, these scrubbers set the stage for a future where industrial growth and clean air coexist harmoniously.

In a world where air quality affects us all, solutions that champion purity and sustainability are indispensable. Airfilt Technologies' Fume Scrubbers, underpinned by the power of wet scrubbing, represent a significant leap forward in the battle against air pollution. By harnessing the effectiveness of liquid streams to recover particles and neutralize pollutants, these scrubbers redefine the standards of emissions control. As industries strive for excellence while minimizing their environmental impact, Fume Scrubbers emerge as a testament to progress, innovation, and the shared commitment to a cleaner, healthier world.

Frequently Asked Questions

What is a paint booth and why is it essential for industrial applications?

A paint booth is an enclosed environment designed to contain the painting process and manage air quality during painting spraying or finishing applications. It ensures proper ventilation control over dust and contaminants and optimal curing conditions. In industrial settings paint booths enhance the quality of finishes reduce overspray and promote a safer working environment for both workers and the products being painted.

How does Airfilt Technologies paint booth solution stand out from the competition?

Airfilt Technologies paint booth solution stands out through its advanced filtration systems and customizable designs. Our booths incorporate high-efficiency air filtration ensuring that airborne particles contaminants and overspray are effectively captured. Additionally our booths can be tailored to various sizes configurations and airflow specifications ensuring a perfect fit for diverse industrial painting needs.

Related Products


In the bustling urban landscape of Delhi, where industrial growth and urbanization go hand in hand, the concern for air quality has taken center stage. The growing need to combat pollution and ensure a healthier environment has led to the rise of innovative solutions, and at the forefront of this movement is Airfilt Technologies Private Limited, a pioneering name in air filtration systems. Through their advanced Pulse Jet filter Unit, Airfilt Technologies is redefining how Delhi addresses its air quality challenges.

The Pulse Jet Filter Unit: An Effective Solution

The pulse jet filter unit is an effective and widely proven system, lauded for its remarkable ability to efficiently collect dust and particulate matter. Its high dust collection efficiency forms the basis for its wide-ranging application across diverse industries. The heart of this system lies in its ingenious working principle, which optimizes the filtration process for maximum efficacy.



Centralized Dust Collector: A Cutting-Edge Solution by Airfilt Technologies Private Limited

At Airfilt Technologies Private Limited, we are dedicated to revolutionizing air quality management with our innovative solutions. Our Centralized Dust Collector, a pinnacle of our commitment to cleaner and healthier industrial environments, stands as a testament to our expertise and dedication. With a focus on comprehensive air filtration, we undertake the designing and commissioning of the Centralized Dust Collection System on a turnkey basis. This unique approach ensures that our clients benefit from a seamless integration of this cutting-edge technology into their operations.

Designing and Commissioning Excellence: Our journey towards excellence begins with the meticulous design and commissioning of the Centralized Dust Collection System. We understand that every industry has its own distinct challenges and requirements. Hence, our approach involves customizing the system to suit specific needs, ensuring optimal efficiency and effectiveness. By offering turnkey solutions, we simplify the implementation process for our clients, allowing them to seamlessly integrate the system into their existing setup.



As the name suggests, Cartridge Type Dust Collector have cartridges in place of conventional needle felt filters. The product is quite popular in the industries due to its capability in providing a large filtration area as compared to fabric filters. A cartridge has pleated media and numerous pleats are provided to increase the filtration surface. This eventually results in the compact design of the dust collector. It also reduces the raw material involved in the dust collector. It is mainly useful in areas where there is a height restriction.

Air quality has become a paramount concern in today's industrial landscape, where various processes can emit harmful particulates and pollutants into the atmosphere. In this pursuit of cleaner air, Airfilt Technologies Private Limited presents its cutting-edge solution - the Cartridge Type Dust Collector. With a commitment to innovation and environmental responsibility, Airfilt Technologies is revolutionizing air filtration systems to ensure a healthier and safer environment for all.

Introduction to Cartridge Type Dust Collector

The Cartridge Type Dust Collector is a state-of-the-art air filtration system designed to capture and remove airborne contaminants from industrial and commercial spaces. It employs a unique cartridge-based filtration approach, making it an efficient and reliable choice for improving air quality across various sectors.



In an era where air pollution and its hazardous consequences are becoming increasingly evident, maintaining clean indoor air quality is of paramount importance. Airfilt Technologies Private Limited presents an innovative solution through their cutting-edge Manual Dust Collector, designed to enhance air purification in various industrial and commercial settings. This type of filter unit is suitable where the dust load is not much and volume of air to be handled is less. The dust-laden air is passed through the filters where it gets trapped on the filters and clean air is exhausted out. Unlike Pulse jet system which also is a bag type dust collector, the filters are cleaned manually or through a shaking mechanism.

 

Model No.

Air Volume

Negative Pressure Pa

Filtration Area in m2

Power in HP

RPM

AF-200

2000 CMH

2000

4.25

2

2900

AF-300

3000 CMH

2300

4.25

3

2900

AF-500

5000 CMH

2500

8.5

5

2900

AF-1000

7500 CMH

2500

12.5

10

2900



Cyclone type dust collectors offer a remarkably cost-effective solution for trapping dust particles, playing a pivotal role in maintaining air quality standards within various industries. These collectors embody the perfect fusion of simplicity and efficacy. A typical Cyclone dust collectors comprises a cylindrical body seamlessly transitioning into a conical portion. The concept behind its operation is ingeniously simple yet highly efficient: dust-laden air enters the cyclone tangentially, initiating multiple revolutions within both the cylindrical and conical sections. This intricate dance is where the magic of separation occurs. Cyclone separators harness the principles of centrifugal force to facilitate the separation of particles from the air or gas stream. The centrifugal force drives the dust particles to congregate adjacent to the cyclone's inner wall, resulting in a distinctive tangential velocity being imparted to the particles. This velocity shift transforms the original axial flow into an entrancing spiral flow, further facilitating the separation process. Under the influence of tangential, axial, and radial forces, the dust particles gracefully settle at the bottom of the cyclone, while the purified air elegantly exits from the top.



In the realm of industrial and commercial applications, maintaining optimal air quality and ventilation is paramount. Centrifugal blowers have emerged as indispensable components in achieving efficient air movement and ventilation solutions. Airfilt Technologies Private Limited, a pioneer in air filtration and ventilation systems, stands at the forefront of delivering cutting-edge centrifugal blowers that cater to diverse industries with a focus on performance, reliability, and sustainability. The centrifugal blower uses high-speed impellers or blades to impart velocity to air or other gases. They can be single or multi-stage units. Like fans, centrifugal blowers offer several blade orientations, including backward-curved, forward-curved, and radial. Blowers can be multi- or variable-speed units, usually driven by electric motors, often through a belt and sheave arrangement. However, some centrifugal blowers are directly coupled to drive motors. Fan speed can be changed to vary flow rates by resizing sheaves, using variable frequency drives, but dampers are even more common as a means of adjusting flow.



In the realm of industrial progress, the need for sustainable solutions has never been greater. Airfilt Technologies Private Limited addresses this pressing need through their innovative offering – Fume Scrubbers. At the heart of these scrubbers lies the concept of wet scrubbing, a technique that employs a liquid stream to effectively cleanse gases, recovering minute particles and ensuring environmental responsibility. With a focus on purity and compliance, Airfilt's Fume Scrubbers redefine air quality management, making them an indispensable asset for industries across the spectrum.

Wet Scrubbers: A Closer Look: Wet scrubbers represent a sophisticated approach to emissions control, harnessing the power of liquid interaction to cleanse gases of pollutants. These scrubbers are not merely devices; they are eco-conscious tools that hold the potential to transform industrial emissions. Wet scrubbers are engineered to purify process streams and remove harmful substances from gases before they are released into the atmosphere. Their ability to effectively handle moist gases and high-temperature streams positions them as a versatile solution for diverse industries.



Paint Booth is an essential equipment for containing the overspray and safeguarding the health of the work force. It finds a very wide application in the industry where various paint finishes has to be given to the wooden products. It not only protects manpower from the harmful effects of the overspray but also saves the environment. A paint booth ensures a dust free area for painting and good product finish. Broadly the Paint Booths can be categorized into two types as follows:

  • Dry Paint Booth.

 

  • Water Wash Paint Booth.


In an era where climate control and energy efficiency are paramount concerns, Airfilt Technologies Private Limited introduces a groundbreaking solution - the Evaporative Cooler. With an innovative blend of technology and design, our evaporative coolers redefine the way we experience cooling, ensuring optimal comfort while remaining environmentally conscious.

  • Capacity 3000 CFM to 60000 CFM.
  • Induces cool fresh filtered air into the area of application.
  • Air tight construction with negligible leakage.
  • Odorless air.
  • Option of Double Skin or Single Skin construction.


In industrial and commercial settings, the proper management of air quality is of paramount importance. Harmful fumes and airborne pollutants not only jeopardize the health and safety of workers but can also lead to environmental degradation. Recognizing the critical need for effective fume management, Airfilt Technologies Private Limited presents its advanced Fume Exhaust System, a state-of-the-art solution designed to ensure clean and safe air environments.

The exhaust system installed over the presses takes care of the fumes generated from the presses. It comprises the Hood, the Suction Duct, and Axial Flow Fan. The main feature is the design of the fan, which does not get affected by the fumes.



Axial Flow Fans for Efficient Air Movement: A Comprehensive Solution from Airfilt Technologies Private Limited

The Axial Flow Fans manufactured by Airfilt cover a wide range of air quantities and pressures, making them a versatile and powerful solution for various industrial applications. These fans boast a cast aluminium alloy impeller with high-efficiency blades, embodying the company's commitment to quality and performance. Designed to achieve an optimal balance between air quantity, pressure, and power consumption, Airfilt's axial flow fans stand as a testament to the company's dedication to engineering excellence and innovation.

Axial flow fans, renowned for their ability to move air or gas parallel to the fan's rotational axis, play a vital role in industries where effective air movement is essential. These fans excel at providing high airflow rates while maintaining relatively low pressure increases, making them an ideal choice for numerous sectors, including HVAC systems, manufacturing, agriculture, and more.


Dark Mode
Light Dark